一、介紹
濟南裝載機配件的裝載機散熱系統的功用，就是把發動機系統、傳動系統和液壓系統等所產生的工作熱量，及時有效地散發到周圍空氣中，使發動機系統、傳動系統和液壓系統處于可靠和有效的工作熱狀態。由水散熱器和油散熱器組成其中水散熱器和油散熱器緊靠，且布置為兩層，水散熱器為管片式，油散熱器為板翅式，三分之二布置為傳動油散熱器，三分之一布置為液壓油散熱器，散熱系統通過1個吹風式風扇冷卻，冷卻風先掃過發動機等部件，然后通過風扇、水散熱器、油散熱器流到周圍環境中，完成熱交換。
Jinan function loader loader accessories cooling system, is to work the heat engine system, transmission and hydraulic systems generated by the timely and effective dissemination into the surrounding air, the engine system, transmission and hydraulic system is reliable and effective working thermal state. The composition of the water radiator and oil cooler radiator and oil where water radiator close, and arranged two water radiator pipe piece, plate-fin oil radiator, two-thirds arranged to drive oil cooler, third arranged hydraulic oil radiator, cooling system by a blower fan cooling, cooling wind swept the first engine and other parts, and then flow through the fan, water cooler, oil cooler surroundings after heat exchange.

二、保養
1、定期清洗，使油路和水路暢通。
Regular cleaning, so the oil and water flow.　
2、初春、冬季應特別注意停機后立即打開放水閥，將水放凈，防止蓋及芯凍裂。
Spring, winter special attention should stop playing immediately after opening the valve, the water put the net, to prevent cracking the cover and core.
3、裝配時要嚴格保持封油圈原來的裝配位置，防止油水混合，及時檢查、更換老化的封油圈。
Assembly to strictly maintain the original seal oil ring assembly position to prevent oil-water mixture, timely inspection, replacement of aging oil seal ring.
4、重新裝配后，要保證各密封處無滲漏。
After re-assembly, to ensure that each seal without leakage.

濟南裝載機配件：http://m.greennutrition.cn/