山東裝載機產生拉缸故障的原因有哪些？
[ 發布日期：2023-01-07 15:10:28 ] 來源:永保機械 瀏覽：760次
1.冷卻系統出現故障，機器出現過熱，活塞受熱后膨脹過大。
1 cooling system failure, the machine appears overheating, the piston is expanded after heat.
2.山東裝載機 http://m.greennutrition.cn/機油油量不足、變質或含有雜質，引起潤滑不良。
2 the amount of oil is insufficient, metamorphic or contain impurities, causing bad lubrication.
3.活塞與氣缸壁間隙過小(多見于新機或剛大修過的柴油機)。
3 piston and cylinder wall clearance is too small (more common in the new machine or just overhaul of the diesel engine).
4.山東裝載機 http://m.greennutrition.cn/活塞環折斷或卡死。
4 piston ring broken or stuck dead.
5.活塞銷卡簧失效，使活塞銷發生竄動。
5 piston pin clamping spring failure, so that the piston pin.
1 cooling system failure, the machine appears overheating, the piston is expanded after heat.
2.山東裝載機 http://m.greennutrition.cn/機油油量不足、變質或含有雜質，引起潤滑不良。
2 the amount of oil is insufficient, metamorphic or contain impurities, causing bad lubrication.
3.活塞與氣缸壁間隙過小(多見于新機或剛大修過的柴油機)。
3 piston and cylinder wall clearance is too small (more common in the new machine or just overhaul of the diesel engine).
4.山東裝載機 http://m.greennutrition.cn/活塞環折斷或卡死。
4 piston ring broken or stuck dead.
5.活塞銷卡簧失效，使活塞銷發生竄動。
5 piston pin clamping spring failure, so that the piston pin.
